lamp 320mm 220vac 1000w halogen bulb

May 4, 2026

Power, Voltage, and the Right Fit

Let’s talk about this 320mm halogen lamp. It’s spec’d at 1000W and 220V AC for a reason. You get a steady, predictable heat output that slots right into standard industrial setups. That 220V rating keeps the current manageable, so you don’t have to rewire everything or upgrade your contactors just to get the heat you need. And that 320mm length? Not random. It defines the hot zone and gives you a clean, practical mounting footprint. You get a compact profile that still spreads the 1000W across enough surface area for a stable, repeatable heating pattern.

What’s Inside, and Why It Matters

Inside, you’ve got a tungsten filament living inside a high-temp quartz tube, filled with halogen gas. The magic happens with the halogen cycle—it keeps the filament from blackening the tube too soon. So the lamp holds steady on brightness and heat, shift after shift. Quartz handles quick temperature swings like a champ. It runs hot enough to stay stable, even when you’re cycling the lamp on and off all day. And we finish it off with an R7s base. That double-ended pin design locks the lamp in place and keeps alignment consistent. Swapping one out is a no-brainer—no fiddling with special clips or custom holders.

Built for the Job Site

This setup was born for process heating where you need fast, focused infrared energy. Think sealing, curing, drying, and spot heating on packaging and converting lines. The 1000W punch gives you quick response—you feel it the moment you switch on. But yeah, it runs hot. So give it proper clearance, use a fixture that can take the heat, and plan your control strategy so the material you’re working on doesn’t overheat. Pay attention to the ends of the lamp and make sure your machine’s ventilation is up to the task. Run it at the rated voltage, and you’ll get consistent heat without overthinking the electrical side.